IntelliCenter Control System Menu 17 Home Screen Icons Setup Wizard (Advanced System Configuration) Pool IntelliCenter Control System Menu 19 Setup IntelliCenter Control System for Remote WiFi Connections Features Lights (GROUPS) Lights (GloBrite White Light & Dimmer) Air Temp 77°F Air Temp 77°F...
(*) Connection indicators on the Indoor and Wireless Control Panel. Padlock: Home screen is passcode protected. Requires password to access the Home screen. Pentair logo: Connection to intellicenter.com server. Battery Icon: Wireless Control Panel battery indicator. Green/Amber/Red Dot: Display on the Indoor Control Panel and Wireless Control Panel.
Note: Blue Badge will stay on for the Egg Timer duration (12 Hrs. default). If the Egg Timer is hide Status Badge icons, see Settings > Alerts and Notifications. set to Don't Stop the Schedule will run continuously until manuall switched off. IntelliCenter Control System Quick Reference Guide...
Cycle Time (min): Set the freeze protection time from 5 to 60 minutes to run the pump during freezing temperatures. Off Default time is 5 minutes. See Settings > Advanced System Configuration > Delays. Spa Freeze Override Time (0-240 min (4 hrs) - See Delays. IntelliCenter Control System Quick Reference Guide...
Egg Timer is set to, after which the scheduled program will resume. This feature will turn off any scheduled program to allow manual pump override. Default is OFF. See Settings > General > Manual Operation Priority. IntelliCenter Control System Quick Reference Guide...
Home screen Features Green Badge: Displays the number of active feature circuits. To display circuits in the Features screen, see Settings > Advanced System Configuration > Installation Setup > Circuits > Feature Circuits > Feature Circuit Settings (Visible in Features (Y/N) option). IntelliCenter Control System Quick Reference Guide...
Tap the Thumper button to toggle the Blue Magenta state of the MagicStream Laminar. The new setting will be save. Light Colors Screen IntelliCenter Control System Quick Reference Guide...
Page 8
Color Set: Tap this momentary button to activate (Green light on) to set the default color for each light then stop the light on one of the selected 8 colors. To change the light color or the light delay (from 0 to 60): Tap Settings > Groups. Select the group of lights to change. Tap Color Settings. Set the delays between the lights from 0 to 60 sec. IntelliCenter Control System Quick Reference Guide...
Configuration > Installation Setup > Circuits. GloBrite White Light Dimmer Level: Use the Up/Down arrow button to increase or decrease the brightness levels of the light. Brightness levels are from 50%, 75% and 100% increments. IntelliCenter Control System Quick Reference Guide...
The color swim effect starts from the first light, then the color change is delayed across to the adjacent lights creating a wave delay effect. For more information about light features, see Circuit Type in Advanced System configuration > Installation Setup > AUX Circuits > AUX Settings (Circuit Type). IntelliCenter Control System Quick Reference Guide...
Pump Status: Shows the current power usage in Watts, and flow rate in gallons per minute (GPM) while the pump is operating. Tap Return to save the setting and return to the previous screen. IntelliCenter Control System Quick Reference Guide...
Heater Name: Tap the heater name to change the current heater name. Tap Cool Down Delay (min): The gas heater Cool Down Delay (min) can be set from 0 to 10 minutes (5 min. default). Note: Pentair gas heaters do not require a cool down period.
Weekdays: M Tu W Th F Mon Tue Wed Thu Fri Manual On times for circuits (auxiliary and Feature circuit) controlled by the IntelliCenter™ Control System. Circuits can be scheduled set to turn On or Pool Lights AUX 4 8:00pm-11:00pm...
Page 15
After the scheduled One time Only program is completed, it is automatically erased. If the heater and pump already are on a schedule. If the equipment is off, the One Time Only timer will switch it on for the scheduled time that has been set. IntelliCenter Control System Quick Reference Guide...
System [Advanced System Configuration] Update the IntelliCenter Co ntrol System Firmware: From the Home screen Settings > Advanced System Configuration > System: Displays the Firmware Update system firmware version: Version 1.010. Tap System Information to display MAC Address, Serial Number, Manufacturer Date, Firmware Version, IP Address and Current Firmware: v.1.0...
Web and Mobile Interface: Tap to access the Web and Mobile Interface scree. The default setting for Web Interface is OFF. This enables the Web based and mobile interface which allows local network and Internet communications with the IntelliCenter™ Control System. To disable Web based and mobile interface, set to OFF. Note: For the IntelliCenter Control System to connect to the Web requires connection of the Wireless Bridge Transceiver Antenna to the Outdoor main circuit board.
Network and WiFI Setup [Advanced System Configuration - Remote WiFi connection Setup) From the Network and WiFi Setup screen you can set up Ethernet settings using DHCP (default on) or a static IP Address to connect to your network. The IntelliCenter Control System Client Bridge Wireless Antenna (P/N 523213) provides a wireless connection to your home wireless router.
LCD control panel will display the PENTAIR END USER LICENSE AGREEMENT. Please read this agreement. To continue, tap the Down arrow on the right side of the screen to scroll down to the end of the agreement and tap I Accept to accept the agreement. The Home screen is then displayed. Note: Initial system Power up: The Pentair End User License Agreement is displayed only one time after the initial system power up.
Once the WiFi antenna is installed in the correct location you are ready to configure the IntelliCenter Control System for remote access. Internet Connection and adding a new account for www.intellicenter.com: For the initial system setup, after you have set your zip code and location, the next screen to display is the Pentair User Portal screen.
Page 22
Notes IntelliCenter Control System Quick Reference Guide...
Page 23
Sanford, North Carolina (8 A.M. to 7.30 P M ET) Phone: (800) 831-7133 Phone: (919) 566-8000 Fax: (800) 284-4151 Fax: (919) 566-8920 Visit www.pentairpool.com Moorpark, California (8 A.M. to 4.30 P.M. PT) Phone: (805) 553-5000 (Ext. 5591) Fax: (805) 553-5515 IntelliCenter Control System Quick Reference Guide...
Page 24
IntelliCenter Control System Quick Reference Guide...
Page 25
Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/ or other countries. Unless expressly noted, names and brands of third parties that may be used in this document are not used to indicate an affiliation or endorsement between the owners of these names and brands and Pentair Water Pool and Spa, Inc. Those names and brands may be the trademarks or registered trademarks of those third parties.