HP 98700H CE Handbook page 22

Connecting the HP-HIL Extension/ Audio Module
CAUTION
THE HP-HIL CABLES ARE NOT END
FOR END INTERCHANGEABLE. THE END
MARKED WITH TWO DOTS MUST BE CON-
NECTED INTO A CONNECTOR WITH THE
SAME NUMBER OF DOTS. EQUIPMENT
DAMAGE WILL RESULT IF THIS PRECAU-
TION IS NOT FOLLOWED.
To install the HP-HIL Extension/ Audio
Module~
follow this procedure:
1. Ensure that the system has power removed.
2. Plug the one-dot end of the HP-HIL interconnect cable into the
one-dot connector on the extension module.
3. Plug the two-dot end of the cable into the two-dot, HP-HIL con-
nector on rear panel of the HP 98700.
4. Plug the one-dot end of the coiled HP-HIL keyboard cable into the
one-dot connector on the rear of the keyboard.
5. Plug the two-dot end of the cable into the two-dot connector on
the HP-HIL Extension/Audio Module.
2-14
Environmental/Installation/Preventive Maintenance