HP 98700H CE Handbook page 11

HP·HIL Cables
HP-HIL is limited to seven devices on one loop, and the power available
is 12 watts (+12 volts at 1 Amp). Do not exceed this value. Another
restriction is the length of cable between each device. Maximum distance
is 2.4 metres, device to device, with a total of 16.8 metres maximum.
This does not include the 15 metre and 30 metre extension options that
are available.
Power Cables
The power cord shipped with your graphics display station should be the
appropriate one for your location. (See the diagram below that pictures
the different power cord options.) If your power cord needs replacement,
refer to the diagram and order an exact replacement.
@
&§J
~
~
Q
G3
[QJ
~
• •
~ ~
•
N l
~ ~
N l
Switzerland United States
Australia Denmark
Europe Great Britain South Africa 120V
Country
Part Number
Power cords supplied by HP have polarities matched to the
ustralia 8120-1369
power-input socket on the computer:
• L
=
Line or Active Conductor (also called "live" or
Denmark 8120-2956 912 250V, 6A
"hot")
Europe 8120-1689 902
250V, 6A
• N = Neutral or Identified Conductor
Great Britain 8120-1351 900
250V, 6A
• E
=
Earth or Safety Ground
South Africa 8120-4211 917 250V, lOA
Switzerland 8120-2104 906 250V, SA
NOTE: Plugs are viewed from connector and. Shape of molded
United States 8120-1378 903 12OV, lOA
plug may vary within country.
Figure 2-1. Power Cord Options
Environmental/Installation/Preventive Maintenance
2-3
I