HP 98700H CE Handbook page 15

Connecting the HP 98710A
1. Ensure that the HP 98700 is disconnected from its power source.
2. Remove the cover plate on the front bottom of the HP 98700 and
place it in the storage position provided. Plate must be installed
over the connector for the HP 98700 to operate by itself. See figure
3-1.
3. Move the locking mechanism on top of the HP 98710A to the rear.
4. Set the HP 98700 on top of the HP 98710A, ensuring that the
guide pins enter the guide pin sockets.
5. Gently but firmly press the HP 98700 down until the connector
engages and seats.
6. Slide the locking mechanism forward to lock the two together.
Figure 2-4. Removing the Cover Plate
Environmental/Installation/Preventive Maintenance
2-7