HP 98700H CE Handbook page 20

Series 500 Installation
CAUTION
THE ELECTRONIC ASSEMBLIES IN THE
DISPLAY STATION ARE SUSCEPTIBLE TO
DAMAGE BY ELECTRO-STATIC DIS-
CHARGE. EXTREME CARE MUST BE OB-
SERVED WHEN HANDLING PRINTED CIR-
CUIT ASSEMBLIES. USE AN ANTI-STATIC
WORKSTATION.
The HP 98288A Display Station Buffer card is installed into the Proces-
sor Stack area of the Series 500 Model 550 computer. There are 12 card
slots in the processor stack area. The DSB's must be installed in slots
4 through 7 only and the first DSB must be in slot 4. Slots 1 through
12 contain in order;
• 1 contains the CPU
• 2 contains the lOP
• 3 contains RAM
• 4 thru 7 contains either DSB or RAM.
• 8 thru 12 contains RAM.
The processor stack configuration must be contiguous (that is, no empty
slots between cards).
There are no configuration switches on the DSB card.
The 98700-61583 interconnect cable is connected to the DSB card,
dressed through one of the cable separator slots at the rear of the Model
550 computer, and the
~lodel
550 cover is closed. The other end of the
interconnect cable is attached to the HP 98700.
2-12
Environmental/Installation/Preventive Maintenance