Eye-Qsetup; Setting The Configuration - Runco DTV-873 Owner's Operating Manual

Appendix 2
EYE-Q SETUP
TM
The EYE-Q SETUP procedure needs to be done only once
TM
after projector is correctly installed or whenever the projector is
reinstalled in another position.
To enter the EYE-Q SETUP menu:
TM
Highlight EYE-Q by pushing the
TM
control disc.
Press the <ENTER> button to set the correct projector
configuration.

Setting the Configuration

When using a rear screen projector, this option must be set to
rear. Follow the steps described below to set the right configu-
ration:
Highlight FRONT (or REAR) by pushing the
of the control disc.
Press the <ENTER> button to set the correct projector
configuration.
The EYE-Q SETUP menu provides you with easy to use
TM
methods to focus the camera lens and to center the camera.
Please pay attention while doing it, as a properly focused
camera lens and correctly centered camera are prerequi-
sites for a perfect automatic convergence.
or keys of the
or keys
APX-4
EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with
or
then <ENTER>.
<EXIT> to return
TM
EYE-Q SETUP
FOCUS THE LENS
CENTER THE CAMERA
CONFIGURATION: rear/front
LEARN REFERENCE
TOUCH-UP OPTIONS
Select with
or
then <ENTER>.
<EXIT> to return