Service Mode; Starting Up The Service Mode; Overview Flowchart 'Service' Mode; Projector Setup - Runco DTV-873 Owner's Operating Manual

Starting up the Service mode.

Use the control stick to highlight 'Service' and then press ENTER.
Some items in the Service mode are password protected (when the password
function is active). Enter your password to continue. All other password pro-
tected items are now also available if you stay in the adjustment mode.
ENTER continues to the Service Mode main menu.
EXIT returns to the Operational mode.
The service items are combined in two service menus. To switch from the
first to the second menu or vice versa, push the control stick forward or back-
ward to select 'more...'

Overview flowchart 'Service' mode.

Overview flowchart 'Service' mode

SERVICE MODE

PROJECTOR SETUP

MEMORY MANAGEMENT
COMMON SETTINGS
12C DIAGNOSTICS
ADJUSTMENT MODE
Select a path from
below :
RANDOM ACCESS
INSTALLATION
Select with
then <ENTER>
<EXIT> to return.
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALLSETTINGS MIDPOS
R & B CONVERGENCE
GREEN CONVERGENCE MID
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
MEMORY BANKS
7-1
SERVICE MODE
GUIDED
SERVICE
EYE-Q
SERVICE MODE
or
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
12C DIAGNOSTICS
Select with
or
then <ENTER>
<EXIT> to return.