Getting Started: Dr-300 Projector; Input Panel Description - Runco Reflection DR-300 Owner's Operating Manual

Getting Started: DR-300 Projector

INPUT PANEL DESCRIPTION

All connections are located on the underside of the unit. Please refer to the following drawing:
1. RGB/Component/HD
INPUT PANEL
1. RGB/Component/HD Input
Connect RGB or component output from a high resolution source (computer, DTV decoder,
progressive DVD player, etc.) here.
2. S-Video Input
Connect an S-video signal here.
3. Composite Video Input
Connect a Composite video signal here
4. AC Input
Connect AC power here.
5. ComLink (RS-232 Control)
Connect the RS-232 output of a control system here (AMX, Crestron, etc.) see page 23.
2. S-Video
.
6
3. Composite Video
4. AC Input
5. ComLink