Installing The Autoscope Lens Motor (Rs-900/Cinewide With Autoscope); Rs-900/Cinewide With Autoscope Motor Assembly - Exploded View - Runco RS-900 Owner's Operating Manual

Installation
Installing the AutoScope
Lens Motor
(RS-900/CineWide with
AutoScope)
➤
Figure 3-5 shows the RS-900/CineWide with AutoScope motor assembly.
CineWide with AutoScope
Screw, Phillips Flat-Head,
10-32 x 1/4" (2x)
AutoScope Lens Motor 2
Screw, Phillips 1
Pan-Head,
10-32 x 1/2"
(4x)
Nylon Spacer, 7
5/8" diameter x
3/16" high (4x)
Figure 3-5. RS-900/CineWide with AutoScope Motor Assembly – Exploded View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector by
turning them counterclockwise until they come
out.
4
Ceiling Mount Adapter/
Projector Stand, Right
3
22
CineWide with
5
AutoScope
Ceiling Mount Adapter/
Projector Stand, Left
Runco RS-900 Owner's Operating Manual
6 Screw, Phillips
Flat-Head,
Undercut,
M6 x 12mm
(4x)