Table of Contents
Advertisement
[ For India only ]
AC adaptor information
IS 616/IEC 60065
R-41016268
Battery pack information
IS 16046/IEC 62133
R-41022500
4
DVQX1483 (ENG)
Note regarding the Power Management
function specified under COMMISSION
REGULATION (EC) No 1275/2008
implementing Directive 2009/125/EC of the
European Parliament and of the Council.
This device is designed and manufactured for
use at a broadcasting station and/or in a similar
environment.
This device is not equipped with a Power
Management function or the Power
Management function is set to OFF as it will
prevent the device from fulfilling its intended
purpose for the reasons below.
1.
If the device is a Studio Camera, a
Weather Camera, a Mixer or other
processor:
A Power Management function may
cause the device to suddenly stop
during recording or while On Air.
2.
If the device is a Studio Monitor:
A Power Management function may
cause video for the confirmation of
whether a signal is normal, or whether
the signal has been lost, to be un-
viewable.
3.
If the device is a Camera Recorder:
A professional camera recorder must be
able to start quickly at any time, but a
Power Management function will cause
an increase in the time taken to resume
from Stand-by mode.
Hide quick links:
Advertisement
Table of Contents
