Appendix 2 Component List Of The Rd77Gf; Reference Product; Recommended Product - Mitsubishi Electric MELSEC iQ-RD77MS2 User Manual

Appendix 2
The positioning system using the Simple Motion module is configured of the following devices.
No. Part name
1 Simple Motion module
2 Servo amplifier
3 Slave device compatible with
CC-Link IE Field
4 CC-Link IE Field Network
cable
5 Ethernet hub

Reference product

Connection cable
Cables for CC-Link IE Field Network are available from Mitsubishi Electric System & Service Co., Ltd. (Catalogs for cable are
also available.)
In addition, the connector processing of cable length is available for your preference. Please consult your local Mitsubishi
representative.
Ethernet cable
CC-Link IE Field Network cable
■Cable types
The following cable types are available depending on the operating environment:
• Standard type: Cables for inside the control panel and indoor connection
• L type: Cables for outdoor connection
Cables and relay adapters of flame retardant or waterproof type are also available. Please contact your local Mitsubishi
representative.

Recommended product

Hub
Use the recommended hubs listed below. Operation is not guaranteed if hubs other than the recommended ones are used.
Type
Industrial managed switch
Industrial switching hub
Use the CC-Link IE Field Network synchronization communication-compatible switching hubs when using the CC-Link IE
Field Network synchronization communication function.
CC-Link IE Field Network synchronization communication-compatible switching hubs are available from Mitsubishi Electric
System & Service Co., Ltd. Please consult your local Mitsubishi representative.
Type
Industrial managed switch
CC-Link IE Field Network synchronization communication-compatible
switching hub
Component List of the RD77GF
Type Remarks
RD77GF4
RD77GF
RD77GF8
RD77GF16
RD77GF32
 
 
 Cables are needed for connecting the Simple Motion module with a servo amplifier/slave
device compatible with CC-Link IE Field, or between servo amplifiers/slave devices
compatible with CC-Link IE Field. (Page 95 Reference product)

Switching hubs are needed for connecting the Simple Motion module, a servo amplifier, and
other brand drive units in star topology. (Page 95 Recommended product)
Model (Manufacturer)
SC-E5EW series (Mitsubishi Electric System & Service Co., Ltd.)
Model (Manufacturer)
NZ2MHG-T8F2 (Mitsubishi Electric Corporation)
NZ2EHG-T8N (Mitsubishi Electric Corporation)
Model (Manufacturer)
NZ2MHG-T8F2 (Mitsubishi Electric Corporation)
DT135TX (Mitsubishi Electric System & Service Co., Ltd.)
Number of controlled axes
GF: CC-Link IE Field Network model

Appendix 2 Component List of the RD77GF

A
Maximum
extension level
4 levels
4 levels
APPX
95