Fortimail-5001A Board Overview - Fortinet FortiMail-5001A Hardware Manual

Hide thumbs Also See for FortiMail-5001A:
Table of Contents

Advertisement

FortiMail-5001A board overview

FortiMail-5001A board overview
FortiMail-5001A Hardware Guide
Version 3.0 MR5
http://docs.fortinet.com/
Feedback
The FortiMail system is a high-performance Advanced Telecommunications Computing
Architecture (ACTA) compliant board that can be installed in any FortiGate 5000 series
chassis.
Figure 1: FortiMail-5001A front panel with a FortiGate-ASM-S08 module
AMC slot with ASM-S08
5001A
ASM-S08
Retention
Screw
Extraction
Lever
The FortiMail-5001A board includes the following features:
Two front panel 10/100/1000Base-T copper 1-gigabit ethernet interfaces.
Two base backplane 1-gigabit interfaces (base CH0 and Base CH1 on the front panel
and base1 and base2 in the firmware.)
Two fabric backplane interfaces (Fabric CH0 and Fabric CH1 on the front panel and
fabric1 and fabric2 in the firmware).
RJ-45 RS-232 serial console connection.
2 USB connectors.
Mounting hardware.
LED status indicators.
The DC power level is -40.5 VDC to -57 VDC.
Use the front panel interfaces for connections to your networks and the backplane
interfaces for communication across the ACTA chassis backplane.
You can also configure two or more FortiGate-5001A boards to create a high availability
(HA) cluster using the base or fabric backplane interfaces for HA heartbeat
communication through the chassis backplane, leaving front panel interfaces available for
network connections.
Note: In most cases the base backplane interfaces are used for HA heartbeat
communication and the fabric backplane interfaces are used for data communication.
(80GB storage)
HS
OOS
ACTRDY
PORT
Port1 and Port2
10/100/1000
Copper Interfaces
RJ-45
Fabric and Base
Console
network activity
LEDs
USB
Retention
Screw
IPM
ACC
Extraction
LED
OOS
Lever
(board
Power
position)
Status
LEDs
5

Advertisement

Table of Contents
loading

Table of Contents