Table of Contents
Advertisement
Factory default settings
Factory default settings
20
Requirements:
•
The console cable that came packaged with your FortiMail-5001A board.
•
Terminal emulation application (for example, HyperTerminal for Windows) on the
management computer.
The FortiMail-5001A System unit ships with a factory default configuration. The default
configuration allows you to connect to and use the FortiMail-5001A web-based manager
to configure the FortiMail-5001A System for your network. To configure the
FortiMail-5001A System for your network, add an administrator password, change the
network interface IP addresses, and add DNS server IP addresses.
Table 6: FortiMail-5001A factory default settings
Administrator Account
port1 IP/Netmask
port2 IP/Netmask
Default route
Primary DNS Server:
Secondary DNS Server:
Note: At any time during the configuration process, if you run into problems, you can reset
the FortiMail-5001A System to the factory defaults and start over. From the CLI enter
execute factoryreset.
User Name: admin
Password: (none)
192.168.1.99/24
192.168.100.99/24
Gateway: 192.168.100.1
Device: port2
65.39.139.53
65.39.139.53
Connecting to the board
FortiMail-5001A Hardware Guide
Version 3.0 MR5
http://docs.fortinet.com/
•
Feedback
Advertisement
Table of Contents
