Function - Mercedes-Benz B-Class Operator's Manual

Hide thumbs Also See for B-Class:
Table of Contents

Advertisement

Press release button ? on belt buckle =.
X
Guide belt tongue ; back to belt sash
X
guide :.
Belt warning for the driver and front
passenger
Every time the engine is started, the 7
seat belt warning lamp lights up for six
seconds. It lights up regardless of whether
the driver's and front-passenger seat belts
have already been fastened. If the driver's
and front-passenger seat belts have already
been fastened, the 7 seat belt warning
lamp then goes out.
If the driver's seat belt is not fastened when
the engine is started, an additional warning
tone will sound. This warning tone stops after
a maximum of six seconds or once the
driver's seat belt is fastened.
If after six seconds, the driver or front
passenger have not fastened their seat belts
and the doors are closed:
the 7 seat belt warning lamp remains lit
R
as long as the driver's or front-passenger's
seat belt is not fastened
and
if a vehicle speed of 15 mph (25 km/h) is
R
exceeded, the 7 seat belt warning lamp
begins to flash. A warning tone also sounds
Occupant safety
with increasing intensity for a maximum of
60 seconds or until the driver or front
passenger have fastened their seat belts.
If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
7 seat belt warning lamp lights up and a
warning tone sounds again.
The warning tone ceases even if the driver or
front-passenger seat belt has still not been
fastened after 60 seconds. The 7 seat belt
warning lamp stops flashing but remains
illuminated.
After the vehicle comes to a standstill, the
warning tone is reactivated. The 7 seat
belt warning lamp flashes again if the vehicle
speed exceeds 15 mph (25 km/h).
The 7 seat belt warning lamp only goes
out if:
both the driver and the front passenger
R
have fastened their seat belts.
or
the vehicle is stationary and a door is open.
R
i
For more information on the 7 seat
belt warning lamp, see "Warning and
indicator lamps in the instrument cluster,
seat belts" (
page 237).
Y
Emergency Tensioning Devices, seat
belt force limiters
G
WARNING
Pyrotechnic Emergency Tensioning Devices
that have been deployed are no longer
operational and are unable to perform their
intended protective function. This poses an
increased risk of injury or even fatal injury.
Therefore, have pyrotechnic Emergency
Tensioning Devices which have been
triggered immediately replaced at a qualified
specialist workshop.
! If the front-passenger seat is not
occupied, do not engage the seat belt
tongue in the buckle on the front-
passenger seat. Otherwise, the Emergency
55
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents