Fluke 9500B User Handbook Manual page 157

IEEE 488.2 Common Commands and Queries Implemented in the Model 9500B
6.C.1 Clear Status
This command conforms to the IEEE 488.2 standard requirements.
∗CLS
clears all the event registers and queues except the output queue.
The output queue and MAV bit will be cleared if ∗CLS
immediately follows a 'Program Message Terminator'; refer to
the IEEE 488.2 standard document.
Appendix C to Section 6: 9500B System Operation — IEEE 488.2 Common Commands and Queries
*
CLS
Execution Errors:
None.
Power On and Reset Conditions
Not applicable.
Appendix C to
Section 6 of the
User's Handbook for
Model 9500B
6-C1