WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1.
Disconnect the electrical power to the
microwave oven.
2.
Remove the cabinet from the microwave
oven (see page 2-2 for the procedure).
CAUTION: Discharge the high voltage ca-
pacitor terminals with a 20,000 ohm resis-
tor to chassis ground.
REMOVING THE MAGNETRON
3.
Disconnect the filament connector from
the magnetron terminals.
4.
Remove the wire strap screw and the four
magnetron mounting screws and remove
the magnetron from the waveguide.
Strap Screw
Mag Screws
Filament
Connector
2-10
Waveguide
Magnetron
Mag Screws