Removing The Door Interlock Switches - Whirlpool GM8155XJQ Job Aid

REMOVING THE DOOR INTERLOCK SWITCHES

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Disconnect the electrical power to the
microwave oven.
2. Remove the cabinet from the microwave
oven (see page 2-2 for the procedure).
CAUTION: The three door interlock switches
are mounted in a plastic holder (see below).
The locking arms that hold the switches in
place are easily broken if bent too far. Do not
overbend the arms.
NOTE: You may fine it easier to service the
door switches with the electronic oven control
removed. The procedure is shown on page 2-3.
Primary Switch
Monitor Switch
Secondary Switch
3. To remove the primary door interlock
switch:
a) Disconnect the wire connector from the
terminals.
Primary (Top) Door Switch
b) Carefully pull out on the switch while
you raise the locking arm, and remove
the switch from the plastic holder.
Pull Out
Continued on the next page.
2-5
Wire Connector
Raise Locking Arm