Record Of Use Check - Sony DVCAM DSR-11 Service Manual

6. Record of Use Check

Page E Address D0 to E3
Address
D0 OPRATION 1
D1
D2 DRUM RUN 1
D3
D4 TAPE RUN 1
D5
D6 THREADING 1
D7
D8 CHECK SUM 1
D9
DA OPRATION 2
DB
DC DRUM RUN 2
DD
DE TAPE RUN 2
DF
E0 THREADING 2
E1
E2 CHECK SUM 2
E3
Using method:
1) The record of use data is displayed at page: E, addresses: D0
to E3.
Note: When the drum was replaced, initialize the drum rotation
counted time.
Initializing method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: E, address: D0, set data: 00, and press the PAUSE
button.
3) Select address: D1 and E3 and set data "00" into them in the
same way as in address: D0.
4) Select page: 0, address: 01, and set data: 00.
Function
Lower two digits The cumulative total hours of operating time is displayed.
Higher two digits
Lower two digits The cumulative total hours of drum rotation with tape threaded is displayed.
Higher two digits
Lower two digits The cumulative total hours of tape running time is displayed.
Higher two digits
Lower two digits The cumulative number of tape unthreading operations is displayed.
Higher two digits
Lower two digits
Higher two digits
Lower two digits The cumulative total hours of operating time is displayed.
Higher two digits
Lower two digits The cumulative total hours of drum rotation with tape threaded is displayed.
Higher two digits
Lower two digits The cumulative total hours of tape running time is displayed.
Higher two digits
Lower two digits The cumulative number of tape unthreading operations is displayed.
Higher two digits
Lower two digits
Higher two digits
Remark
5-37