Changing The Decorative Front Panel - A.O. Smith HSE-SAS User Manual

Changing the Decorative Front Panel

Please follow the instructions as shown in (Fig. 18).
Figure 18
1. Pull out the Knob.
• Please ensure to switch o the power supply while changing the Decorative Front Panel and
pull out the power plug from the socket.
• An insulation layer is provided below the front panel which should not be replaced.
• While changing the front panel ensure that, none of the internal components are damaged
or removed.
2. Unscrew the screw on
the Decorative Front Panel.
WARNING
16
3. Remove the Decorative
Front Panel to change.