Parts Supplied - Fisher & Paykel CG301D Installation Manual

Gas-on-glass cooktop
Hide thumbs Also See for CG301D:
Table of Contents

Advertisement

Dual Wok Pan support
(Models with a Dual Wok only)
Elbow 1/2" BSP
external thread (1)
Installing multiple products
Note: We recommend installing multiple products in separate cutouts, with a minimum 5mm space between the glass edges of the adjacent products.
If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.
If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different
products may vary. Always use the greater distance
Pan support
(not supplied with
Dual Wok only models)
Clamping
ULPG test point
brackets (4)
adaptor (1)
and screws
(ULPG models only)
2

PARTS SUPPLIED

Mini wok Pan
Small pan support (1)
(some models only)
support (1)
(CG604D only)
NG regulator (1)
(NG models only)
Wok stand (1)
Fibre washer (1)
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cg302dCg603dCg604dCg752dCg903dCg905d ... Show all

Table of Contents