Top Speakers - HP ENVY x360 13 Maintenance And Service Manual

Top speakers

Description
Top speakers (include cable)
Before removing the top speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the top speakers:
1. Disconnect the display cable from the system board ZIF connector (1).
2. Disconnect the camera cable from the system board ZIF connector (2).
3. Disconnect the speaker cable from the system board (3).
4. Remove the speaker cable from the clip near the right speaker (4).
36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 27).
25).
Spare part number
L19601-001