Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SBA-LN4F/F User Manual

X11SBA-LN4F/F User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Philips
Screwdriver
(1)

Tools Needed

JPAC1
JIPMB1
SRW1
SRW2
COM1
JL1
1

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Philips Screws
(4)
VGA
JPG1
LAN2
LAN4
X11SBA
DESIGNED IN USA
LEDBMC
mSATA/mini PCIE
I-SATA1
BIOS LICENSE
JSD1
USB7/8
JTPM1
JF1
USB2/3(3.0)
USB0/1
LAN1
IPMI_LAN
LAN3
CPU
SODIMM2(1.35V only)
JF1
PWR NIC NIC HDD PWR
RST X OH/FF X NMI
ON 2 1 LED LED
JPW1
JSATA1
22
Standoffs (4)
Only if Needed
HDMI/DP
JPME2
LED1
LED2
FAN1
BAR CODE
JPW2
JSTBY1
BT1
JBT1