Quick Reference Table - Supermicro X11SBA-LN4F/F User Manual

X11SBA-LN4F/F User's Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JI C1/JI C2 SMB to PCI-E Slots Enable/Disable
2 2
JPAC1 Audio Enable
JPG1 VGA Enable/Disable
JPME2 Manufacturing Mode
JWD1 Watch Dog Timer
LED Description
LED1 CPU Power LED
LED2 Standby Power LED
LED3 Main Power LED
LEDBMC BMC Heartbeat LED
Connector Description
AUDIO FP Audio Front Panel Header
BT1 Onboard Battery
COM1/COM2 Serial COM Headers
FAN1/FAN2 System/CPU Fan Headers
HDMI/DP Back Panel High Definition Multimedia Interface/DisplayPort
IPMI_LAN IPMI Dedicated LAN Port
I-SATA0/I-SATA1 Intel® PCH SATA 3.0 Ports (I-SATA1 supports SuperDOM)
JGP1 General Purpose I/O Headers
JD2 External Speaker Header
JF1 Front Panel Control Header
JIPMB1 4-pin BMC External I2C Header
JL1 Chassis Intrusion Header
JPW1 24-pin ATX Power Connector
JPW2 4-pin 12V Power Connector (Optional Power Source when the 24-pin ATX power is not in use)
JSATA1 4-pin Connector for HDD use (to provide power from the motherboard to onboard devices)
JSD1 SATA DOM Power Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1 ~ LAN4 LAN (RJ45) Ports (-F with dual LAN only)
mSATA/miniPCI-E mSATA/mini-PCI-E Connector
SLOT1 CPU Slot PCI-E 2.0 X1 (IN X8)
SRW1/SRW2 mSATA Holding Screws
Note: Table is continued on the next page.
Default Setting
Open (Normal); Short: Clear CMOS
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Blue On: Power On
Green On: Power On
Green On: Power On
Blinking Green: BMC Normal
12