Installing Memory - Supermicro X11SBA-LN4F/F User Manual

X11SBA-LN4F/F User's Manual

2.3 Installing Memory

Warning: To prevent possible damage, exercise extreme caution when installing or removing
memory modules.
Installing a SO-DIMM Module into a Horizontal Socket
1. Install SO-DIMM modules into slot SODIMM1 and then SODIMM2. Align the receptive
point on the bottom of the SO-DIMM module against the key on the memory socket.
Note the notches on the side of the SO-DIMM module and those on the socket to avoid
causing damage.
Receptive Point on
2. Line up the bottom of the SO-DIMM memory module with the edge of the horizontal
socket.
3. Once they are lined up, push the memory module into the memory socket until the
module is securely seated in the socket.
Figure 2-1. SO-DIMM Installation Step 1
the Module
Socket Key
Figure 2-2. SO-DIMM Installation Step 2
Figure 2-3. SO-DIMM Installation Step 3
SO-DIMM Memory
Module
Memory Module Socket
24