Supermicro X11SBA-LN4F/F User Manual page 15

Peripheral Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 2/3)
•
Four (4) internal USB 2.0 ports with two (2) headers (USB 5/6, USB 7/8)
•
One (1) Type-A USB 2.0 connector (USB 4)
BIOS
•
128Mb SPI AMI BIOS
®
•
ACPI 3.0 or later, SMBIOS 2.7 or later, PCI F/W 3.0, BIOS Rescue Hot-key, RTC (Real Time Clock) Wakeup
Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel® Trusted Execution Engine (Intel® TXE)
•
ACPI Power Mnagement
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, +5V, +12V, +3.3V Stdby, +5V Stdby, +1.05V Stdby, +1.2V, VBAT, CPU, GFX,
Memory.
•
System overheat LED and control
•
CPU Thermal Trip support
•
Status monitor for speed control
•
Status monitor for on/off control
Fan Control
•
Fan status monitoring via IPMI connections
•
Low-noise fan speed control
•
Pulse Width Modulation (PWM) fan control
•
Fan Speed Control
System Management
•
Trusted Platform Module (TPM) support
•
SUM-InBand
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis intrusion header and detection
Note: The table above is continued on the next page.
Motherboard Features
SM Flash UEFI BIOS
15
Chapter 1: Introduction