Windsor PowerTec 28 Owner's Manual page 9

Brush Installation:
Slide brush or pad driver under drive
1.)
plate.
2.) Align one metal lug on the brush or
pad driver with the scrub deck sight hole 2.) Reach under brush or pad driver and rotate
(A) and a keyhole in the drive plate.
3.) Raise the brush or pad driver upward
and twist towards the outside until locked.
Splash Skirt Adjustment
1.) Lower brush or pad.
2.) Loosen knob (counter-clockwise),
then adjust vinyl skirt to floor level
and re-tighten.
PARTS LIST:
14 62141 Plate, Brush Drive
15 27470
POWERTEC 28/34
Brush Removal:
Raise brush or pad driver off floor (press
1.)
down handle at rear of machine and
lock-in to right).
so
visible through the scrub deck sight hole
(A)
3.)
release.
\
.
\
\
17
Brush
Drive
that the metal lug in the drive plate is
PAD DR IVER & B RUSH OPTIONS;
PART NO. DESCRIPTION
02183 Brush, 14" Nylon Rotary
02184 Brush, 1 4 Polypro Rotary
02185 Brush, 1 4 Mal-grit Rotary
Brush, 17, Nylon Rotary
021 86
02187 Brush, 17" Polypro Rotary'
02188 Brush, 17" Mal-grit Rotary
Pad Driver, 14" Gry pad lock
021 89
Pad Driver, 17" Gry pad lock
02190
Pad Driver, 14" Yellow pad lock
021 95
Pad Driver, 17" Yellow pad lock
021 96
1
See Odlons:
9