Operational Instructions - Stamina WONDER 15-0336 Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON : Pedal movement or press the button.
POWER OFF : Automatically shuts off after four minutes of
inactivity.
MODE BUTTON:
Press to select display functions, including SCAN, TIME,
SPEED, DISTANCE, and CALORIE.
Press and hold for three seconds to reset all functions to
zero.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, and CALORIE in
sequence, display changes every six seconds. Press and release the button until the
arrow appears on the display and points to SCAN.
TIME:
Displays the time from one second up to 99:59 minutes.
SPEED:
Displays the current speed from zero to 999.9 miles per hour.
DISTANCE:
Displays the distance from zero to 99.99 miles.
CALORIE:
Displays the calories burned from zero to 999.9 Kcals.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the MODE button and hold it down for three seconds to reset all functions
to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries (1.5V each), the batteries
are not included. Refer to the illustration to install or replace the
batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
13
AA Batteries