1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Ranges
  5. NY58J9850WS
  6. Installation manual

Samsung NY58J9850WS Installation Manual

Dual fuel range
Hide thumbs Also See for NY58J9850WS:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
Dual Fuel Range
Installation manual
NY58J9850WS

Advertisement

Table of Contents
loading

Related Manuals for Samsung NY58J9850WS

Summary of Contents for Samsung NY58J9850WS

  • Page 1 Dual Fuel Range Installation manual NY58J9850WS...

  • Page 2: Table Of Contents

    Contents Contents WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. • DO NOT store or use gasoline or other flammable vapors and liquids Before you begin in the vicinity of this or any other appliance.

  • Page 3: Before You Begin

    Before you begin Important safety information ABOUT THIS MANUAL READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY. • All electrical and gas equipment with moving parts can be dangerous. Please IMPORTANT NOTE TO THE INSTALLER read the important safety instructions for this appliance in this manual.
  • Page 4 Important safety information COMMONWEALTH OF MASSACHUSETTS • Do not use oven cleaners or oven liners in or around any part of the oven. • Use only dry pot holders. • This product must be installed by a licensed plumber or gas fitter qualified •...
  • Page 5 GAS SAFETY ELECTRICAL AND GROUNDING SAFETY WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions. •...
  • Page 6 Important safety information INSTALLATION SAFETY • Installation of this range must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with the current Natural Gas WARNING Installation Code, CAN/CGA-B149.1, or the current Propane Installation Code, To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the...
  • Page 7 • Cabinet storage above the surface of the range should be avoided. If cabinet • Make sure the spark mark on the dual burner spreader is placed beside the storage above the range is necessary: allow a minimum clearance of 40 inches electrode when it is assembled.
  • Page 8 Important safety information OVEN SAFETY WARMING DRAWER SAFETY WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions.

  • Page 9: Dual Fuel Range Components

    10 Oven light (2 location) * 11 Convection fan / 12 Oven rack system Convection heater 13 Bake oven heater NOTE If you need a part marked with a “*”, you can buy it from the Samsung Contact Center (1-800-726-7864). English 9...

  • Page 10: What's In The Box

    Dual fuel range components What’s in the box Parts needed Parts supplied Gas line shut-off Flexible metal Flare union adapter Flare union adapter valve appliance connector ¾ in or ½ in (NPT) ½ in (NPT) ½ in (ID) x 5 ft x ½...

  • Page 11: Dual Fuel Range Specifications

    What’s not included Dual fuel range specifications MODEL NY58J9850WS DESCRIPTION Dual Fuel Range 29 15/16 in (W) x 36 3/16 in (H) x 26 7/16 in (D) 4-Wire Cord or 3-Wire Cord Strain Relief OVERALL DIMENSIONS 759 mm (W) x 919 mm (H) x 670 mm (D)

  • Page 12: Installation Requirements

    Installation requirements Location requirements Clearances and dimensions BEFORE YOU BEGIN to install this appliance, refer to the following information, dimensions, and clearances. Do not locate the range where it may be subject to strong drafts. Provide adequate clearances between the range and adjacent combustible surfaces.
  • Page 13 Exception 2 : For island installation, maintain 2-½” minimum from cutout to back Recommended locations for gas piping and electrical outlets (For models NY58J9850WS) edge of countertop and 4” minimum from cutout to side edges of countertop. IMPORTANT: Recommended position To eliminate the risk of burns or fire caused by reaching over heated surface units, avoid having cabinet storage space located above the surface units.

  • Page 14: To Avoid Breakage

    Installation requirements To avoid breakage CAUTION Do NOT lift or handle the unit by the cooktop frame. CAUTION The counter top around the cut-out Please DO NOT push the unit strongly when should be flat and leveled (See hatched you install. These actions can cause the area on Fig.

  • Page 15: Gas Requirements

    Gas requirements Special gas requirements (gas models sold in Massachusetts) Provide adequate gas supply COMMONWEALTH OF MASSACHUSETTS REQUIREMENTS: This range is designed to operate at a pressure of 5 in (13 cm) of water column on WARNING natural gas or 10 in (25 cm) of water column on LP gas (propane or butane). Gas leaks may occur in your system, creating a dangerous situation.
  • Page 16 Installation requirements • This range is equipped with an electronic ignition system that will not operate CAUTION if plugged into an outlet that is not properly polarized. Failure to follow these instructions can result in death, fire, or electrical shock. Gas models Usage situations where appliance power cord will be disconnected •...

  • Page 17: Installation Instructions

    Installation instructions Installing your dual fuel range This appliance must be supplied with the proper voltage and frequency, and IMPORTANT: connected to an individual properly grounded branch circuit, protected by a Please read the following instructions, as well as the Important Safety Instructions circuit breaker or fuse having amperage section at the front of this manual, completely and carefully BEFORE installing as specified on the rating plate.

  • Page 18: Step 3. Accessing The Power Cord Connection

    Installation instructions Use only a 3-conductor or a 4-conductor UL-listed range cord. These cords may be Specified power-supply-cord kit rating provided with ring terminals on wire and a strain relief device. Diameter (inches) of range Range rating, watts Specified rating A range cord rated at 40 amps with 125/250 minimum volt range is required.
  • Page 19 Installing a 3-wire power cord Installing a 4-wire power cord WARNING WARNING The neutral or ground wire of the power cord must be connected to the neutral The neutral wire of the supply circuit must be connected to the neutral terminal terminal located in the center of the terminal block.

  • Page 20: Step 5. Installing The Conduit

    Installation instructions Step 5. Installing the conduit Installing a 3-wire conduit • Aluminum building wire may be used but it must be rated for the correct Remove the conduit connection plate from the rear of the drawer body and rotate amperage and voltage to make the connection.

  • Page 21: Step 6. Replacing The Access Cover

    Installing a 4-wire conduit Step 6. Replacing the access cover • Aluminum building wire may be used but it must be rated for the correct Replace the access cover on the range back. To replace the wire cover, insert amperage and voltage to make the connection. Connect wires according to this double projections in the pockets located below the opening and tighten the screw.

  • Page 22: Step 7. Connect The Range To Gas Supply

    Installation instructions Step 7. Connect the range to gas supply Install male 0.5-in (1.3-mm) flare union adapter to the 0.5-in (1.3-mm) NPT internal thread at the regulator inlet. Use a backup wrench on the regulator Shut off the main gas supply valve before disconnecting the old range and leave fitting to avoid damage.

  • Page 23: Step 8. Convert To Lp Gas (Optional)

    All new gas ranges are shipped from the factory set up to use natural gas. Any WARNING Samsung gas range can be converted to use LP gas. Refer to page 57 in the User To reduce the risk of tipping, the appliance must be secured by properly installing Manual to contact a qualified service technician.

  • Page 24: Step 10. Plug In And Place

    Installation instructions Step 10. Plug in and place Step 11. Level the range Make sure the range is positioned WARNING where you want it. BEFORE OPERATING OR TESTING, follow the grounding requirements on pages Using a wrench, level the range by 15 ~ 16 in this manual.

  • Page 25: Step 12. Assemble The Surface Burners

    Step 12. Assemble the surface burners Step 13. Check the ignition of surface burners Check the operation of all cooktop and oven burners after the range has been CAUTION installed and assembled, gas supply lines have been carefully checked for leaks, Do not operate the surface burners without and electrical power cord has been plugged in.

  • Page 26: Step 14. Final Installation Checklist

    Installation instructions Checking the flame quality: To adjust flame low setting All combustion flames need to be visually checked to determine their flame Identify which burner is exhibiting too high or too low of simmer rate via manifold quality. panel graphics. Soft blue flames—Normal for natural Rotate a knob to "LO"...
  • Page 27 Memo English 27...
  • Page 28 How-to Videos and Live Shows * Requires reader to be installed on your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Consumer Electronics www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French) DG68-00693A-04...

Table of Contents