Waiting Second Dial Tone Code - Panasonic KX-TD500 Installation Manual

4.5.7 Waiting Second Dial Tone Code

Used to assign parameters for Waiting Second Dial Tone feature.
Value Range
Parameter
(default)
Mode 1. Enable
2. Disable
(Disable)
Entry No. 001-200
in 20 codes
increments
(001 - 020)
Dial Up to 4 digits
consisting of
Pause None,1 - 4
Specifies whether Waiting Second Dial Tone (WSDT)
Mode is enabled or disabled.
[Note]
• In some areas, upon completion of area code entry, the
extension user must ensure the reception of the second
dial tone from the Central Office before dialing the
office code and the subscriber number.
Specifies the entry numbers of WSDT codes which you
are going to program.
Specifies 1 - 4 digits facility access code required by
the Central Office.
0-9, X One character "X" can be used as a wild card character
(Blank) that substitutes any digits in its position.
Up to 200 Waiting Second Dial Tone codes can be
assigned.
Specifies the number of pause (fixed dialing delay)
(None) required to ensure the receipt of CO dial tone. One
pause is equivalent to 4.5 seconds dialing delay.
Description/Function
System Programming
Reference
4-83