Properties (Dhlc/Eslc/Dlc) - Panasonic KX-TD500 Installation Manual

4.1.1 Slot Assignment

4.1.1.1 Properties (DHLC/ESLC/DLC)

Used to set the parameters for the following extension cards :DHLC, ESLC,DLC
Value Range
Parameter
(default)
Pulse Type 1. Type-A: Normal
2. Type-B: New
3. Type-C: Sweden
(Type-A)
% Break 1. 16 - 96 msec
Detection 2. 16 - 136 msec
(16 - 96 )
Flash 1. Yes
Detection 2. No
(Yes)
Dial Pulse Signal type is fixed to "Type-A: Normal."
Zealand
Specifies the Pulse Break Detection length.
Dialed digits from a dial pulse type SLT is transmitted
to the system by making and breaking a loop current,
thereby interrupting loop current. Duration time
required to detect the number of breaks may vary
depending on the type of SLT connected.
(Assignable for DHLC and ESLC only.)
Activates or deactivates the detection of Flash signal
transmitted from an SLT.
If set to "No," the system does not recognize a
hookswitch flash.
(Assignable for DHLC and ESLC only.)
Description/Function
System Programming
Reference
4-
5