Panasonic KX-TD500 Installation Manual page 205

4.4.2 Extension Line
Value Range
Parameter
(default)
COS No.
Mail Box No. 3-4 digits
consisting of 0-9
(Same as the
extension number)
CO key (CO 01:Loop-CO)
(Others:Not stored)
PF key (Not stored)
Display Mode of 1. Name
Incoming Call 2. Caller ID
(Name)
Message Lamp 1. Yes
2. No
Preferred Line
Outgoing 1. No Line
2. Idle Line
3. Prime Line
- ICM/PDN
4. Prime Line
- CO
(Prime Line - ICM)
Key No.
(Blank)
4-66 System Programming
1 - 96 Specifies the COS (Class of Service) number to the
(1) extension.
[Note]
• COS is used to define a set of services available to the
extension user.
Specifies the mailbox number for the extension users.
A mailbox number is usually associated with an
extension that is the same number.
Used to determine the usage of the flexible CO buttons
on a PT.
You can enter into "Flexible CO Key" assignment
screen by clicking [CO Key] button on this screen.
Used to determine the usage of PF (Programmable
Feature) buttons on a PT.
You can enter into "Flexible PF Key" assignment
screen by clicking [PF Key] button on this screen.
Specifies the initial display of a display PT when an
incoming CO call with Caller ID information comes in
on it.
Assigns whether an SLT with MESSAGE lamp can
receive the message waiting indication or not.
(No)
(Assignable when an SLT with Message lamp is
interfaced by an MW-SLC or ESLC card.)
Specifies the line to which the extension is connected
automatically when it goes off-hook for making a call.
1 - 24 Specifies the CO button number to which the extension
is connected when it goes off-hook to make a call.
This assignment is required when "Prime Line - CO" is
specified in "Preferred Line - Outgoing" programming.
Description/Function Reference
Caller ID
(F/G)