Advertisement
Failover/Failback Options:
USB modem connection for a
phone line to a fax machine or
secondary line OR WAN2 as
secondary broadband connection
Connect an Ethernet cable
from this port to your
current router/firewall.
Connect the antenna (included with firewall).
Make sure they are pointed perpendicular to
the ground at 90° angles. This allows for
wireless access point detection.
Connect all devices to ports 2 - 7.
This would include PC's, Terminals,
Servers, DVR's, etc. These devices
should be moved from your current
router/firewall to these ports. You
may use a switch to add port density
by plugging it into one of these ports.
Connect your Point of
Sale (POS) system to
port 1 on the firewall.
2016 Netsurion, LLC. All rights reserved.
Advertisement
