Parameters List; Table 16: Integrator Block Parameters - Honeywell ST700 User Manual

Parameters List

Parameter
ST_REV
TAG_DESC
STRATEGY
ALERT_KEY
MODE_BLK
BLOCK_ERR
TOTAL_SP
OUT
OUT_RANGE
GRAND_DENY
STATUS_OPTS
IN_1
IN_2
OUT_TRIP
OUT_PTRIP
TIME_UNIT1
TIME_UNIT2
UNIT_CONV
PULSE_VAL1
PULSE_VAL2
REV_FLOW1
Page 74 FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide

Table 16: Integrator block parameters

The revision level of the static data associated with the function block.
The user description of the application of the block.
Used to identify grouping of blocks. This data is not checked of
processed by the block.
The identification number of the plant unit. This information may be
used in the host for sorting alarms.
The actual, target, permitted, ad normal modes of the block.
Target: The mode to "go to"
Actual: The mode the "block is currently in"
Permitted: Allowed modes that target may take
Normal: Most common mode for target.
The summary of active error conditions associated with the block. The
block error for the Integrator function block is Out of service.
The set point for a batch totalization.
The block output value and status.
The high and low scale values, engineering units code, and number of
digits to the right of the decimal point associated with OUT.
Options for controlling access of host computers and local control
panels to operating, tuning, and alarm parameters of the block (not
used by the device).
It helps to select option for status handling and processing. The
supported status options for the Integrator block are: "Uncertain if
Manual mode."
The block input value and status.
The block input value and status.
The first discrete output.
The second discrete output.
Converts the rate time, units in seconds.
Converts the rate time, units in seconds.
Factor to convert the engineering units of IN_2 into the engineering
units of IN_1.
Determines the mass, volume or energy per pulse.
Determines the mass, volume or energy per pulse.
Indicates reverse flow when "True"; 0-Forward, 1-Reverse
Description
Revision 2.0