Honeywell ST700 User Manual page 9

Foundation fieldbus pressure transmitter
Hide thumbs Also See for ST700:
Table of Contents

Advertisement

Term
Pr
Proportional Integral
Derivative control
PSI
PSIA
Pu
PV
PWA
RFI
RTD
Stack
Status
STIM
STIMV IOP
System Management
System Management
Agent
System Management
Information Base
TAC
Trim Point
URL
URV
US
Vac
Vdc
Virtual
Communication
Reference
Virtual Field Device
Revision 2.0
FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide
Reduced pressure
A standard control algorithm. Also refers to a PID function block.
Pounds per Square Inch
Pounds per Square Inch Absolute
Static pressure at upstream point
Process Variable
Printed Wiring Assembly
Radio Frequency Interference
Resistance Temperature Detector
The software component that implement the Foundation Fieldbus
communications protocol specifications, including FMS, FAS, DLL, SM and
NM.
A coded value that qualifies dynamic variables (parameters) in function blocks.
This value is usually passed along with the value from block to block. Status is
fully defined in the FF FBAP specifications.
Pressure Transmitter Interface Module
Pressure Transmitter Interface Multivariable Input / Output Processor
Provides services that coordinate the operation of various devices in a
distributed fieldbus system.
Part of the device software that operates on system management objects.
A collection of objects and parameters comprising configuration and
operational information used for control of system management operations.
Technical Assistance Center
A selected reference point at which a measurement is calibrated.
Upper Range Limit
Upper Range Value
Universal Station
Volts Alternating Current
Volts Direct Current
A defined communication endpoint. Fieldbus communications can primarily
only take place along an active communications "path" that consists of two
VCR endpoints.
A logical grouping of "user layer" functions. Function blocks are grouped into a
VFD, and system and network management are grouped into a VFD.
For example, to establish communications between a transducer block and a
function block, a VCR must be defined at the transducer block and a VCR
must be defined at the function block.
Definition
Page ix

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents