Display Menus Flowchart - Roland FJ-50 User Manual

4-4 Display Menus Flowchart

For details about each of the menus, see the "4-5 Description of Keys and Display Menus."
Press the
key
Roland FJ-50
Ver.1.00
When the power is turned
on for the first time, or turned
on after removing the ink
Roland FJ-50
PIGMENT CMYKLcLm
SETUP SHEET
Load the material and press
the
Printable width of
the loaded material
Top
W 1234 mm
menu
FINE BI-DIR
The settings for [PRINT QUALITY] (Printing Direction)
display only in the case of [BI-DIRECTION].
Settings for [PRINT QUALITY] (Printing Quality)
PHOTO/SUPER/FINE/NORMAL/FAST/DRAFT
Selecting the language for screen messages
Roland FJ-50
UNKNOWN INK TYPE
SELECT INK TYPE
PIG.CMYKLcLm
INSTALL
DRAIN TANK
NOW FILLING INK
key
Settings for [OVER PRINT]
OP2 = Twice /
OP3 = Three times
* Not displayed when set to
[NONE].
OP2
+
MENU LANGUAGE
ENGLISH
MENU LANGUAGE
JAPANESE
No ink is filled.
Select the installed ink
type and press the
[ENTER] key.
PIG. CMYKLcLm/PIG. CMYKOrGr/
DYE CMYKLcLm
Attach the drain tank,
and press [ENTER] key.
The system will execute
ink fill.
Press the
PRINT QUALITY
FINE
PHOTO/SUPER/FINE/
NORMAL/FAST/DRAFT
Use
Press the [ENTER] key to enable the setting.
Press the
HEAD CLEANING
START
HEAD CLEANING
TEST PRINT
4 User's Reference
Use or to select.
Press the [ENTER] key
to enable the setting.
key
PRINT QUALITY
BI-DIRECTION
UNI-DIRECTION/
BI-DIRECTION
or to select.
key
Press the [ENTER] key.
Head cleaning starts.
Press the [ENTER] key
to print a test pattern.
47