Electrolux EDW 503 Service Manual page 29

Service Code Reason
Family
(Platform specific)
WP BLDC motor not connected
WP BLDC ADC fault
(DIVA2 only) WP BLDC over temp
(PB100 only)
WP/DP BLDC overload
(PB100 only)
WP/DP current plausibility
(PB100 only) DP BLDC over current HW
(PB100 only) DP BLDC over current SW
(PB100 only) DP BLDC motor not following
(PB100 only) DP BLDC motor not connected
60 Heating problem
Heating – over temperature
Heater relay problems
70 NTC problem
80 Auto Door Opener malfunction
Auto Door Opener
warning
Water Reuse Valve warning
90 Checksum mcf
Checksum ccf
Checksum UIdata
UI data version mismatch
UI data checksum mismatch
Technical Support – A.R.
Alarm Codes
Type User visible
indication
abort Yes
abort Yes
stop Yes
Please OBSERVE that i5A has different meaning depending on platform
abort Yes
i5b (i5H)
abort Yes
abort Yes
abort Yes
abort Yes
abort Yes
warning No Nothing
abort No
abort No
warning No Nothing
abort Yes
timeout warning No Nothing
warning No Nothing
inactive No Nothing
Nothing
inactive No
inactive No Nothing
warning No Nothing
warning No Nothing
599 79 76 - 53 REV 1.0
User failure
code read
i58 i58 Cycle will be terminated and electronic switched to reset on-condition
i59 i59 Cycle will be terminated and electronic switched to reset on-condition
i5A i5A Cycle stop and continuous automatically after problem solved – rta off
i5A i5A
Cycle will be terminated and electronic switched to reset on-condition
i5b (i5H)
Cycle will be terminated and electronic switched to reset on-condition
i5C i5C Cycle will be terminated and electronic switched to reset on-condition
i5d i5d Cycle will be terminated and electronic switched to reset on-condition
i5E i5E Cycle will be terminated and electronic switched to reset on-condition
i5F i5F Cycle will be terminated and electronic switched to reset on-condition
i60 Heating element will be switched off for the rest of the cycle
i61 i61 Cycle will be terminated and electronic switched to reset on-condition
i62 i62 Heating element will be switched off for the rest of the cycle
i70 Heating element will be switched off for the rest of the cycle
i80 i80 Cycle will be terminated and electronic switched to reset on-condition
i81 Auto Door Opener tries to recover. If that fails, the cycle continues
i82 Cycle continues regardless the error
i91 Electronic functionality blocked – all off
i92
Electronic functionality blocked – all off
i93 Electronic functionality blocked – all off
i94 No update of UI configuration data is possible
i95 No update of UI configuration data is possible
Action in case of failure happens
without auto door opener
Dishwashers before
March 2017
User indication
i50
i50
i50
i50
i50
i50
i50
i50
i50
Nothing
i60
i60
Nothing
i80
Nothing
Nothing
Nothing
Nothing
Nothing
Nothing
Nothing
4
Chapter