Electrolux EDW 503 Service Manual page 17

Enable/disable Pulse Wash
After accessed Service mode (L1, L2 and L3 blinking):
1. Press button S2+S3 to enter this function.
 L2 blinks indicating it is in Pulse Wash setting mode.
 Display show the current setting of Pulse Wash. "0P" for
disabled, "1P" for enabled
2. Press button S2 to change the setting
3. Switching off the appliance will exit Service mode.
Technical Support – A.R.
EDW1953
599 79 76 - 53 REV 1.0
3.4
Chapter