Preface And General Precautions; Receiving; About Terms And Abbreviations In This Document; About Registered Trademarks - YASKAWA L1000A Installation Manual

1

Preface and General Precautions

This chapter describes important safety precautions regarding the use of this product. Failure to follow these
precautions may result in serious injury or death, and may lead to damage to this product or related devices and
systems. Yaskawa shall not be held responsible for any injury or equipment damage as a result of failure to
observe the precautions and instructions contained in this manual.
◆

Receiving

This instruction manual contains the information necessary to use the product correctly. Thoroughly read this
manual before installing, wiring, operating, or performing maintenance and inspections. Make sure to read and
understand the safety information and precautions before using the product.
■

About Terms and Abbreviations in This Document

Representations Used in This
Manual
CANopen-Lift Option
Online-DRV
Online-DRVMB
Online-PRG
Host
LED
OPT, Option
INV, Inverter
PCB
FCS
INVR
EDS
■

About Registered Trademarks

• CANopen® is a registered Community Trademark of CAN in Automation e.V.
• Other company names and product names that appear in this document are trademarks or registered trademarks
of the respective companies.
◆

Safety

Read the safety guidelines carefully before installing, wiring, or operating this product.
■

Explanation of Signal Words

DANGER
Identifies a hazardous situation, which, if not avoided, will cause death or serious injury.
WARNING
Identifies a hazardous situation, which, if not avoided, can cause death or serious injury.
CAUTION Identifies a hazardous situation, which, if not avoided, can cause minor or moderate injury.
NOTICE Identifies a property damage message.
■

General Safety Instructions

Yaskawa Electric manufactures and supplies electronic components for a variety of industrial applications. The
selection and application of Yaskawa products is the responsibility of the designer of the equipment or the
customer that assembles the final product. Yaskawa is not responsible for how our products are incorporated into
the final system design. In all cases, Yaskawa products should not be incorporated into a product or design as the
exclusive or sole safety control function. All control functions are designed to dynamically detect failures and
operate safely without exception. All products that are designed to incorporate parts manufactured by Yaskawa
must be provided to the end user and include proper warnings and instructions regarding their safe use and
YASKAWA ELECTRIC SIEP YEUOCL1 01A CANopen-Lift Communication Option Installation Manual
Yaskawa CANopen Lift communication option card
Processing mode, process (ctrl/resp) data is active
Processing mode, process resp data is active, ctrl data is on hold (until MEMOBUS process is
complete)
Processing mode, NO process (ctrl/resp) data is active
YASKAWA inverter drive for Lift L1000A
Light Emitting Diode
The unit described in this document
Inverter drive
Printed Circuit Board
Frame Check Sequence
MEMOBUS register number
Electronic Data Sheet file
1 Preface and General Precautions
Description
5