Saving The Song - Roland HP-203 Owner's Manual

Selecting the Save destination for the Song
4.
Use the [-] [+] buttons to specify whether you want to save the song in
"Int" (Internal Memory) or "EXt" (USB memory or floppy disk).
Internal Memory
5.
Press the [
A screen in which you can select the save-destination number will appear.
Internal Memory
6.
Use the [-] [+] buttons to select the save-destination number.
If the dot in the lower right of the display is lit, a song has already been saved in that number.
Select a number at which no song has been saved.
If you want to erase an unwanted song and replace it with the newly saved song, select the
number of the unwanted song.
fig.d-SongExist-e.eps

Saving the Song

7.
Press the [
The display will indicate "Sur," and the [
If you decide not to save the song, press the [
8.
Press the [
The song will be saved.
NOTE
fig.d-SAv.eps
USB memory, floppy disk
] button.
USB memory, floppy disk
Lit if a song has been saved
] button.
] button.
Never turn off the power while "SAv" is blinking in the display. Doing so will destroy
the save-destination memory, rendering it unusable.
Saving Your Performance
] button and [ ] button will blink.
] button.
61