Roland HP-203 Owner's Manual page 58

Recording
5.
Press the track button for the part you want to record, making the button flash.
This allows you to record while listening to the selected song.
The [
standby mode.
If you decide not to record, press the [
How performance parts correspond with track buttons
Track [Right] button
Track [Left] button
Track [Accomp] button
Starting Recording
6.
Press the [
After a two-measure count, recording will begin.
Even if you don't press the [
this case, a count won't be sounded.
When recording begins, the [
Stopping Recording
7.
Press the [
Recording will stop.
Listening to the Recorded Performance
8.
Press the [
You will return to the beginning of the recorded performance.
9.
Press the [
The recorded performance will play.
10.
Press the [
NOTE
NOTE
56
] button will light, the [
Track button
Right-hand part
Left-hand part
Performance data other than the right-hand part and left-hand part
] button.
During the count, the display will indicate the measure number as "-2" and "-1."
] button.
] button.
] button.
] button once again to stop playback.
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory or USB
memory. Refer to p. 60.
If you have not saved the performance you recorded, you won't be able to play back
another song. You'll have to erase (p. 57) or save (p. 60) the performance before
playing back another song.
] button will flash, and the HP203 will enter recording
] button once again.
Performance part
] button, recording will begin when you play the keyboard. In
] button and [ ] button will light.