Roland HP-203 Owner's Manual page 61

4.
Use the [-][+] buttons to select whether you will initialize "Int" (Internal
Memory) or "EXt" (USB memory or floppy disk).
Internal Memory
5.
Press the [
The display will indicate "Sur," and the [
If you decide not to initialize, press the [
6.
Press the [ ] button.
Initialization will begin.
The entire contents of the selected memory will be erased.
Never turn off the power while "FMt" is blinking in the display. Doing so will destroy
NOTE
the memory being initialized, rendering it unusable.
Initializing the HP203's internal memory will not initialize settings other than the
NOTE
contents of internal memory. If you want to return settings other than the contents of
internal memory to their factory-set condition, execute the Factory Reset operation (p.
79).
Don't disconnect the USB memory until USB memory initialization has been completed.
NOTE
While a floppy disk is being initialized, do not eject the disk from the floppy disk drive
NOTE
or disconnect the cable of the disk drive.
USB memory, floppy disk
] button.
Saving Your Performance
] button and [ ] button will blink.
] button.
59