Setting The Intro And Ending On Or Off; Fixing A Set Chord Progression; Setting The Root Note Of The Chord Progression; Setting The Chord Display On Or Off - Roland FP-2 Owner's Manual

Setting the Intro and Ending
On or Off
This sets session partner Intro and Ending on or off. When
set to "Off," pressing the [Start/Stop] button causes the Intro
and Ending not to be played.
1.
Switch to Function mode (p. 38), and press the
[Start/Stop] button.
fig.04-04
2.
Press the [-] or [+] button to set on or off.
Indication
On Pressing the [Start/Stop] button causes the
Intro and Ending to be played.
OFF Pressing the [Start/Stop] button causes the
Intro and Ending not to be played.
Fixing a Set Chord
Progression
When changing the Session Partner Rhythm, select whether
or not the chord progression is to change along with the
Rhythm.
1.
Switch to Function mode (p. 38), and press the
[Chord Progression] button.
fig.04-04
2.
Press the [-] or [+] button to set on or off.
Indication
On When the rhythm changes, a change to the
optimal chord progression is made.
OFF When the rhythm changes, the chord pro-
gression does not change.
Description
Description
Chapter 4 Other Functions
Setting the Root Note of the
Chord Progression
This sets the root note of the chord progression.
1.
Switch to Function mode (p. 38), and press the
[Part] button.
fig.04-04
2.
Press the key corresponding to the root note of
the first chord.
The root is indicated in the display as shown below.
C d_ d E_
Display
Letter
C D D E
name
→ You can hold down the [Part] button and pressing the [-] or
[+] button to change the cord progression pattern.
Setting the Chord Display On
or Off
This setting determines whether or not the chords are
indicated in the display during performances using Session
Partner.
1.
Switch to Function mode (p. 38), and press the
[Play/Stop] button.
fig.04-04
2.
Press the [-] or [+] button to set on or off.
Indication
Chords are displayed.
On
OFF Chords are not displayed.
E F F G A_ A b_
E F F G A A B
Description
b
B
43