Panel Descriptions; Applying The Tempo Setting Sheet - Roland F-90. Owner's Manual

Introduction

Panel Descriptions

Volume
Min Max
1
Volume
Reverb
Min Max
1. [Volume] Knob
Adjusts the volume (p. 11).
2. [Reverb] Button
Used to add reverberation to the sound (p. 15).
3. Tone Buttons
The following five buttons are collectively referred to as
the Tone buttons. These are used to select the tone to
played via the keyboard (p. 13).
[Piano] Button
[E.Piano] Button
[Harpsichord] Button
[Organ] Button
[Strings] Button

Applying the Tempo Setting Sheet

If desired, you can affix the included tempo setting sheet to the instrument.
Use the tempo setting sheet when setting the metronome tempo.
1.
Position and apply the tempo setting sheet as shown in the figure.
For more details, refer to "Changing the Metronome Tempo" (p. 16).
fig.00-09
Volume
Reverb
Min Max
C1
Low C (C1)
8
Harpsi-
Piano
Reverb E.Piano chord
2 3
Harpsi-
Piano
E.Piano chord Organ Strings Variation Demo
Dual Balance Key Touch
Tempo Setting Sheet
– +
1 2 3
Harpsi-
Piano E.Piano chord Organ Strings Variation Demo
Dual Balance Key Touch
C2 C3
Organ Strings Variation Demo
Dual Balance Key Touch
4 5 6
4. [Variation] Button
This is used in combination with the tone buttons to
select the instrument sounds to be played with the
keyboard (p. 13).
5. [ (Metronome)] Button
Activates the built-in metronome (p. 15).
6. [Demo] Button
This plays the internal piano songs (p. 12).
7. [Power] Switch
This switch turns the unit on/off (p. 11).
4 5 6 7 8
– + –
+
1 2 3 4 5 6 7 8 9 0 Enter
C4 C5
Position "1" at the fourth C
from the bottom (C4).
– +
9 0 Enter
C6 C7
Power
7
Power
Power