Changing The Volume Balance In Dual Play; Changing The Depth Of The Reverb - Roland F-90. Owner's Manual

Some Handy Functions
Setting the Reference Pitch to
440.0 Hz
1.
While holding down the [Variation] button and
[Demo] button, press the "C 4" key on the
keyboard.
fig.7-08.e
Variation Demo
Dual Balance Key Touch
While holding down two buttons...
The reference pitch will be set to 440.0 Hz. This is the
most commonly used setting. The A4 (Middle A) key
will sound at 440.0 Hz.
Setting the Reference Pitch to
442.0 Hz
1.
While holding down the [Variation] button and
[Demo] button, press the "D 4" key on the
keyboard.
fig.7-09.e
Variation Demo
Dual Balance Key Touch
While holding down two buttons
The reference pitch will be set to 442.0 Hz. This setting is
often used for concert pianos. The A4 (Middle A) key
will sound at 442.0 Hz.
Changing the Volume
Balance in Dual Play
You can change the volume balance between the two layered
sounds in Dual Play (p. 14).
When the keyboard is turned on, the volume balance is set to
that the tone assigned to the left Tone button sounds louder
of the two selected tones.
This setting remains in effect until the keyboard's power is
turned off.
fig.5-04.e
The tone assigned
to the left Tone button
sounds louder
Reverb Piano E.Piano
20
C#4
Press
D#4
Press
The tone assigned
to the left Tone button
sounds quieter
Harpsi-
chord Organ Strings Variation
Dual Balance
While
holding down...
Press
1.
While holding down the [Variation] button, press
\
the [
The [Variation] button, [
the tone button for the currently selected value flash.
2.
Press any Tone button.
The pressed button's indicator blinks.
Tone
button
Piano
E. Piano
Harpsi-
chord
Organ
Strings
3.
Press the [
[Variation] button.
The button's indicator returns to its previous state.
You can also return to the previous state by pressing the
[Demo] button.
Changing the Depth of the
Reverb
The depth of the reverb effect (p. 15) can be adjusted.
There are five levels of depth from which to choose.
This is set to "3" when the power is turned on.
fig.7-15.e
Reverb
While holding
down...
1.
Holding down the [Reverb] button, press any
Tone button.
Checking the depth of the
Reverb Effect
Demo
1.
Press and hold the [Reverb] button.
Key Touch
The Tone button indicators will blink to indicate the
Press
selected depth.
(Metronome)] button.
(Metronome)] button and
Description
Of the two selected tones, the tone assigned to
the left Tone button sounds louder.
Of the two selected tones, the tone assigned to
the left Tone button sounds somewhat louder.
The two selected tones are played at the same
volume.
Of the two selected tones, the tone assigned to
the left Tone button sounds somewhat quiet-
er.
Of the two selected tones, the tone assigned to
the left Tone button sounds quieter.
(Metronome)] button or the
1 2 3 4 5
Harpsi-
Piano
E.Piano chord Organ Strings
Press
More strongly
reverb
Variation Demo
Dual Balance Key Touch