Other Problems - Roland AT800 Music Atelier Owner's Manual

Troubleshooting
-
Problems with Playback Functions
Problem
Moving your hand over the D
Beam controller does not produce
a sound
Can't use the function assigned to
the foot switch
Damper Pedal does not operate
Expression Pedal does not
operate

Other Problems

Problem
Can't read/write USB memory
Remote control does not work
The Touch Screen doesn't respond
correctly
Unable to save created Rhythm to
the User Memory
270
Check
If a D Beam button is lit in red, moving
your hand above the D Beam controller
will apply an effect to the sound you
play from the Upper keyboard.
If "Registration Shift" (change
Registrations) is "RIGHT," "LEFT," or
"RIGHT + Load Next," the foot switch
will be dedicated to switching the
Registration.
The damper pedal affects only the
Lower keyboard and Upper keyboard.
The damper pedal does not affect the
Bass pedalboard.
The damper pedal does not affect the
Solo voice.
The function of the Expression Pedal
during recording or the function during
playback has been set to
"COMPOSER."
Check
Could you be using USB memory not
made by Roland?
The external memory setting is
incorrect.
Could the Remote function be turned
off?
If the Remote function is turned off,
data from the remote control will not be
received.
The positioning of the Touch Screen
may become displaced if some time
has passed since it was last used.
"Memory Full" appears in the display.
The available memory remaining in the
ATELIER is not sufficient.
Solution
Press the D Beam button once again so
the button is lit in green.
Turn "Registration Shift" off.
You can change the settings so that the
damper pedal affects the Upper
keyboard.
This is not a malfunction.
Set the expression pedal function during
recording to "PEDAL," and during
playback to "PEDAL" or
"PEDAL+COMPOSER."
Solution
We cannot guarantee operation if you're
using USB memory not made by Roland.
Change the external memory setting.
Refer to "Turning the Remote function on/
off."
Reposition the Touch screen.
First delete some other Rhythm saved to
the user memory, then save the Rhythm
you have created to the user memory
once again.
Page
p. 155
p. 135
p. 212
- - -
p. 211
Page
- - -
p. 227
p. 228
p. 230
p. 207
p. 208