Roland AT800 Music Atelier Owner's Manual page 268

Troubleshooting
Problem
The sound is not played correctly
The volume level of the instrument
connected to ATELIER is too low.
When playing the same sound in
the Upper keyboard and Lower
keyboard, the volume is different
When the human voice "Jazz
Scat" is selected, playing
dynamics do not change the
sound
When you release your fingers
from keys in the Lower keyboard,
the notes continue sounding
Registrations do not Switch Correctly
Problem
The Rhythm or Tempo does not
change when you press the
Registration buttons
Rhythm or Automatic Accompaniment does not Sound Right
Problem
Automatic Accompaniment
sounds odd
Can't use Chord Intelligence
function
Rhythm sounds odd
268
Check
If you layer the same type of sound (for
example, Strings 1 and Strings 5), or
play an octave-shifted organ sound,
the timing at which you play a note or
the phase relationship between the two
sounds may affect the way in which the
sounds are heard, but this is not a
malfunction.
Could you be using a connection cable
that contains a resistor?
On one of the keyboards, "Initial
Touch" is turned ON.
The setting of "Initial Touch" is turned
OFF.
The Lower Voice [Hold] button is at
ON.
Check
The settings at which Registrations are
recalled (Registration Arranger
Update) has been set to "DELAYED."
Check
The keys for a chord were not pressed
simultaneously.
When Chord Intelligence is OFF, the
chord is not being pressed correctly.
When performance data from a device
other than the ATELIER is being played
together with the Automatic
Accompaniment, the Automatic
Accompaniment may not be sounded
correctly.
Chord Intelligence is at OFF.
When performance data from a device
other than the ATELIER is being played
together with the Automatic
Accompaniment, the Rhythm
performance may not be sounded
correctly.
Solution
You are layering sounds of the same type
(e.g., Strings 1 and Strings 5).
Alternatively, you are playing an organ
sound with Octave Shift.
This is not a malfunction.
Use a connection cable that does not
contain a resistor.
Set the initial touch settings of the Upper
keyboard and the Lower keyboard to
both On, or both Off.
Turn "Initial Touch" on.
Press the Lower Voice [Hold] button to
turn it off (dark).
Solution
Set the timing at which the arranger
settings are called up (Registration
Arranger Update) to "INSTANT."
Solution
Either turn on the Chord Intelligence
function, or play the chord correctly.
Either turn on the Chord Intelligence
function, or play the chord correctly.
This is not a malfunction.
Turn "Chord Intelligence" on.
This is not a malfunction.
Page
- - -
p. 243
p. 210
p. 210
p. 80
Page
p. 109
p. 217
Page
p. 90
p. 90
- - -
p. 90
- - -