Disassembly
a) Follow the procedures in Ref. No. 3 in the Disassembly instructions. (ReÍer page 4.)
b) Follow the procedures in ReÍ. No. 10 in the Disassembly instructions. (ReÍer page 6.)
ln this care, short-circuit the TAPE lN terminals oÍ the mechanism pCB.
c) Arrange as shown below.
Connect checker terminals (JM01-JM07) on the mechanism PCB to each pin oÍ thê motor and solenoid
on the mechanism side, using cables with chips. (ReÍer to illustration shown below.)
Mechanism side
Mechanism PCB
Solenoid
PCS 79 283
Short
Main PCB
JMOl ^,JMO7
Motor
-2 2-