POWR
4. Install the oil seal housing 5 onto the
cylinder block.
5
5. Apply sealant to the mating surface of the
crankcase.
NOTE:
Do not get any sealant on the journals.
5-33
Power unit
68850620
68850630
6. Install the dowels 6, crankcase 7 onto
the cylinder block, and then temporarily
tighten the crankcase bolts and nuts.
6
NOTE:
Apply engine oil to the crankcase bolts and
stud bolts before installation.
7. Install the oil seal housing bolts 8 tight-
en temporarily.
7
6
68850640
8
68850650
6885J11