Remove "SA, OPEPANE CABLE-F" and "SA, CUTTER CABLE".
J17: SA, CUTTER
J3: SA, OPEPANE
9.
Disassembling "COVER,
ADAPTER"
Remove four "SCREW, BHT (ST), M3.0 ×
6" that fasten "COVER, ADAPTER" and
"FRAME, BOTTOM".
SCREW, BHT (ST), M3.0 × 6
<Precaution at disassembly / reassembly>
The power connector is a lock-type connector. Unlock the connector by pulling the outer slide at the end of
the connector to disconnect the cable. When fitting the connector, insert it until it clicks and ensure that it
cannot be removed easily.
SA, CUTTER CABLE
SA, OPEPANE CABLE-F
Remove the AC adaptor cable from the power connector.
(Note that this connector is of the lock type.)
- 11 -
CT-S651 Series Service Manual