Citizen CT-S651 Series Service Manual page 12

CT-S651 Series Service Manual
Close "SA, COVER FRAME" slightly, and raise "SA, CASE-02" while pulling the right and left edges of
"SA, CASE-02" outwardly. When "SA, CASE-02" is raised slightly, release "SA, COVER FRAME" and
raise "SA, CASE-02" further while pulling the right and left edges outwardly and keeping the lugs at the
rear clear of "FRAME, BOTTOM".
SA, COVER FRAME
SA, CASE-02
Be sure to keep lugs at the right and left
sides clear of "FRAME BOTTOM".
Raise "SA, CASE-02" along "SA, COVER FRAME". When "SA, CASE-02" is raised to the position
indicated in the photo below, turn it counterclockwise and pull it upwardly to remove it.
<Precaution at disassembly / reassembly>
Do not assemble or disassemble "SA, CASE-02" by force. When removing "SA, CASE-02", raise it little by
little. When reassembling, follow the disassembly procedure in reverse. Face the front panel of "SA,
CASE-02" to the right, pass it through "SA, COVER FRAME", and turn it clockwise. When the front faces
toward you, pull the right and left panels of "SA, CASE-02" outwardly and keep the lugs at the rear clear of
"FRAME, BOTTOM". Push "SA, CASE-02" downward while closing "SA, COVER FRAME".
- 10 -